Các vật liệu đĩa
- 304 thép không rỉ
- thép không rỉ 316L
- Titan
- 254SMO
- Haxtelly
- Nickel
HEXNOVAS replacement plates & gaskets
MỘT SỐ NGƯỜI ĐÃ / Danfoss S41 replacement plate.
HEXNOVAS manufactures replacement plates and gaskets for MỘT SỐ NGƯỜI ĐÃ / Danfoss S41 heat exchangers. The OEM brand and model identify the equipment the parts are intended to fit. Plate pattern, gasket groove, material and operating duty are verified before supply.
Technical reference
Dimensions and identification data.
- Plate width
- 497 mm
- Plate length
- 1100 mm
- Horizontal port distance
- 296 mm
- Vertical port distance
- 890 mm
- Port diameter
- 147 mm
- Channel depth
- 2.60 mm
- Single plate area
- 0.41 m²
- Plate pattern / note
- Sondex
Model-specific engineering review
SONDEX / Danfoss S41: identification and selection notes
S41 is a SONDEX / Danfoss installed-equipment reference. Its published plate size is 497 × 1100 mm and port-centre spacing is 296 × 890 mm.
Dimensions, construction and connections
The record gives a 147 mm port diameter, 2.60 mm channel depth and 0.41 m² single-plate area. These dimensions should be checked as a set, rather than selecting solely by the S41 name.
Port-centre measurements do not specify connection diameter, thread or flange standard. Confirm the complete installed configuration.
Typical selection context
The catalogue does not establish the connection standard, complete frame envelope or certified design limits. Available replacement materials must be reviewed against the actual process and cleaning chemistry.
Replacement plate and gasket family overviewIndustrial fluid and cleaning requirements
Drawing and documentation
The on-page drawing is a generated, not-to-scale identification schematic. Its dimensions come from the reference catalogue; its depicted plate/port geometry is not a certified manufacturing drawing.
HEXNOVAS legacy replacement-plate dimensional catalogue. Source revision/date is not recorded with this catalogue entry.
Request the reviewed model drawing and configuration-specific rating before manufacture or replacement.
What HEXNOVAS needs for final selection
Provide S41 plate identification and gasket-groove details, photographs showing the open/closed ports, material information and frame nameplate. Send both fluid programs and the required replacement scope.
Plate and gasket material selectionCompatibility check
Send the original nameplate and plate photographs.
The dimensions above are an identification reference. HEXNOVAS verifies corrugation, port arrangement, gasket groove, material, thickness and operating conditions before supply.
Third-party brand and model names are used solely to identify existing equipment and dimensional references. HEXNOVAS is an independent supplier and is not affiliated with or endorsed by those manufacturers. Compatibility requires verification of the original plate, gasket groove and operating duty.