Material plat
- 304 stainless steel
- Baja stainless 316L
- Titanium
- 254SMO
- Hastelloy
- Nickel
HEXNOVAS replacement plates & gaskets
Tranter GX42 replacement plate.
HEXNOVAS manufactures replacement plates and gaskets for Tranter GX42 heat exchangers. The OEM brand and model identify the equipment the parts are intended to fit. Plate pattern, gasket groove, material and operating duty are verified before supply.
Technical reference
Dimensions and identification data.
- Plate width
- 385 mm
- Plate length
- 1352 mm
- Horizontal port distance
- 226 mm
- Vertical port distance
- 1189 mm
- Port diameter
- 105 mm
- Channel depth
- 3.30 mm
- Single plate area
- 0.42 m²
- Plate pattern / note
- Tranter
Model-specific engineering review
Tranter GX42: identification and selection notes
GX42 is a Tranter plate identification reference with a 385 × 1352 mm outline and 226 × 1189 mm port centres in the published catalogue.
Dimensions, construction and connections
The listed port diameter is 105 mm, channel depth 3.30 mm and single-plate area 0.42 m². The reference does not document a complete corrugation geometry or establish the meaning of the GX suffix.
Port-centre measurements do not specify connection diameter, thread or flange standard. Confirm the complete installed configuration.
Typical selection context
Plate and gasket compatibility requires the original groove, plate-face pattern and port configuration to be checked. The on-page drawing is not a template for fabricating a plate from the listed dimensions.
Replacement plate and gasket family overviewIndustrial fluid and cleaning requirements
Drawing and documentation
The on-page drawing is a generated, not-to-scale identification schematic. Its dimensions come from the reference catalogue; its depicted plate/port geometry is not a certified manufacturing drawing.
HEXNOVAS legacy replacement-plate dimensional catalogue. Source revision/date is not recorded with this catalogue entry.
Request the reviewed model drawing and configuration-specific rating before manufacture or replacement.
What HEXNOVAS needs for final selection
Send GX42 markings, plate/gasket photographs, material and thickness information, frame identification and the existing plate sequence. Provide operating and cleaning conditions for materials review.
Plate and gasket material selectionCompatibility check
Send the original nameplate and plate photographs.
The dimensions above are an identification reference. HEXNOVAS verifies corrugation, port arrangement, gasket groove, material, thickness and operating conditions before supply.
Third-party brand and model names are used solely to identify existing equipment and dimensional references. HEXNOVAS is an independent supplier and is not affiliated with or endorsed by those manufacturers. Compatibility requires verification of the original plate, gasket groove and operating duty.