Published applications
- 증발기
- 제품정보
- 열 펌프
- 경제학
Existing OEM model reference
SWEP V120T brazed plate heat exchanger.
Use the published dimensions and construction below to identify a possible HEXNOVAS replacement. Thermal duty, connection type, design pressure, brazing material and refrigerant distribution must be confirmed before selection.
Published technical reference
Dimensions and construction.
- Overall width
- 243 mm
- Overall height
- 525 mm
- Horizontal port distance
- 174 mm
- Vertical port distance
- 456 mm
- Published maximum pressure
- Confirm by configuration
- Construction
- Copper-brazed stainless-steel plates with evaporator distribution
- Product family
- V evaporators
Model-specific engineering review
SWEP V120T: identification and selection notes
The SWEP V120T reference has a 243 × 525 mm outline and 174 × 456 mm port centres. The catalogue describes copper-brazed stainless-steel plates with evaporator distribution.
Dimensions, construction and connections
The nearest HEXNOVAS candidate, BL120, shares the published port-centre distances but differs in overall dimensions. The dimensional comparison does not verify an evaporator distributor or matching thermal performance.
Port-centre measurements do not specify connection diameter, thread or flange standard. Confirm the complete installed configuration.
Typical selection context
Evaporator, chiller, heat-pump and economizer contexts are listed. The model entry does not provide a full operating envelope or justify carrying an original unit rating over to a candidate.
Brazed plate construction and family overviewRefrigeration duty and refrigerant-side selection
Drawing and documentation
The on-page drawing is a generated, not-to-scale identification schematic. Its dimensions come from the reference catalogue; its depicted plate/port geometry is not a certified manufacturing drawing.
SWEP V120T evaporator product sheet. Source revision/date is not recorded with this catalogue entry.
Request the reviewed model drawing and configuration-specific rating before manufacture or replacement.
What HEXNOVAS needs for final selection
Provide the full V120T configuration, original pressure/temperature limits, connection drawing and refrigerant-side duty. State the required distributor and operating range along with allowable pressure drop.
Cascade heat-exchanger operating conditionsThird-party brand and model names are used solely to identify existing equipment and dimensional references. HEXNOVAS is an independent supplier and is not affiliated with or endorsed by those manufacturers. Dimensional similarity does not establish thermal, mechanical or connection equivalence.