Published applications
- 증발기
- Reversible 콘덴서
- 사이트맵
Existing OEM model reference
SWEP V25 brazed plate heat exchanger.
Use the published dimensions and construction below to identify a possible HEXNOVAS replacement. Thermal duty, connection type, design pressure, brazing material and refrigerant distribution must be confirmed before selection.
Published technical reference
Dimensions and construction.
- Overall width
- 116 mm
- Overall height
- 524 mm
- Horizontal port distance
- 72 mm
- Vertical port distance
- 479 mm
- Published maximum pressure
- Confirm by configuration
- Construction
- Copper-brazed 316/316L stainless-steel plates with refrigerant distribution
- Product family
- V evaporators
Model-specific engineering review
SWEP V25: identification and selection notes
The SWEP V25 reference is 116 × 524 mm, with 72 × 479 mm port centres. The source entry describes copper-brazed 316/316L plates with refrigerant distribution.
Dimensions, construction and connections
HEXNOVAS BL60 is the nearest dimensional candidate and shares the listed port centres, but the candidate record does not establish equivalent refrigerant distribution. That feature needs its own review.
Port-centre measurements do not specify connection diameter, thread or flange standard. Confirm the complete installed configuration.
Typical selection context
Evaporator, reversible-condenser and cascade duties are recorded contexts for V25. The entry does not establish a particular refrigerant, circuit arrangement or pressure rating for an installed unit.
Brazed plate construction and family overviewRefrigeration duty and refrigerant-side selection
Drawing and documentation
The on-page drawing is a generated, not-to-scale identification schematic. Its dimensions come from the reference catalogue; its depicted plate/port geometry is not a certified manufacturing drawing.
SWEP V25 evaporator product sheet. Source revision/date is not recorded with this catalogue entry.
Request the reviewed model drawing and configuration-specific rating before manufacture or replacement.
What HEXNOVAS needs for final selection
Send the V25 nameplate and configuration, refrigerants/secondary fluid, phase-change conditions, superheat/subcooling requirements, flows and allowable pressure drops. Include distribution and reversing-operation requirements where applicable.
Cascade heat-exchanger operating conditionsThird-party brand and model names are used solely to identify existing equipment and dimensional references. HEXNOVAS is an independent supplier and is not affiliated with or endorsed by those manufacturers. Dimensional similarity does not establish thermal, mechanical or connection equivalence.