Published applications
- Чиллер
- Тепловой насос
Existing OEM model reference
Danfoss / SONDEX B3-030 brazed plate heat exchanger.
Use the published dimensions and construction below to identify a possible HEXNOVAS replacement. Thermal duty, connection type, design pressure, brazing material and refrigerant distribution must be confirmed before selection.
Published technical reference
Dimensions and construction.
- Overall width
- 95 mm
- Overall height
- 325 mm
- Horizontal port distance
- 39 mm
- Vertical port distance
- 269 mm
- Published maximum pressure
- Confirm by configuration
- Construction
- Copper-brazed stainless-steel plates
- Product family
- B3
Model-specific engineering review
Danfoss / SONDEX B3-030: identification and selection notes
The Danfoss / SONDEX B3-030 reference measures 95 × 325 mm, with 39 × 269 mm port centres. The catalogue describes copper-brazed stainless-steel plates for chiller and heat-pump context.
Dimensions, construction and connections
HEXNOVAS BL25 is the nearest dimensional candidate with matching listed port centres but a different envelope. Connection type, installed depth and thermal rating remain separate checks.
Port-centre measurements do not specify connection diameter, thread or flange standard. Confirm the complete installed configuration.
Typical selection context
The existing B3-030 entry does not publish maximum pressure. The rating shown for a candidate or another B3 model must not be substituted for this installed reference.
Brazed plate construction and family overviewHVAC duty and approach-temperature inputs
Drawing and documentation
The on-page drawing is a generated, not-to-scale identification schematic. Its dimensions come from the reference catalogue; its depicted plate/port geometry is not a certified manufacturing drawing.
Danfoss B3-030 manufacturer document AI000086438429en-000101. Source revision/date is not recorded with this catalogue entry.
Request the reviewed model drawing and configuration-specific rating before manufacture or replacement.
What HEXNOVAS needs for final selection
Send the full B3-030 designation, plate count, original mechanical rating and connection information. Provide the fluid or refrigerant, inlet/outlet conditions, flow and allowable pressure drop.
Thermal selection inputs and pressure-drop reviewНазвания сторонних брендов и моделей используются только для идентификации существующего оборудования и его габаритных данных. HEXNOVAS — независимый поставщик, не связанный с этими производителями и не получивший их одобрения. Dimensional similarity does not establish thermal, mechanical or connection equivalence.