Published applications
- المبرد
- مضخة حرارة
Existing OEM model reference
Danfoss / سوندريكس B3-030 brazed plate heat exchanger.
Use the published dimensions and construction below to identify a possible HEXNOVAS replacement. Thermal duty, connection type, design pressure, brazing material and refrigerant distribution must be confirmed before selection.
Published technical reference
Dimensions and construction.
- Overall width
- 95 mm
- Overall height
- 325 mm
- Horizontal port distance
- 39 mm
- Vertical port distance
- 269 mm
- Published maximum pressure
- Confirm by configuration
- Construction
- Copper-brazed stainless-steel plates
- Product family
- B3
Model-specific engineering review
Danfoss / SONDEX B3-030: identification and selection notes
The Danfoss / SONDEX B3-030 reference measures 95 × 325 mm, with 39 × 269 mm port centres. The catalogue describes copper-brazed stainless-steel plates for chiller and heat-pump context.
Dimensions, construction and connections
HEXNOVAS BL25 is the nearest dimensional candidate with matching listed port centres but a different envelope. Connection type, installed depth and thermal rating remain separate checks.
Port-centre measurements do not specify connection diameter, thread or flange standard. Confirm the complete installed configuration.
Typical selection context
The existing B3-030 entry does not publish maximum pressure. The rating shown for a candidate or another B3 model must not be substituted for this installed reference.
Brazed plate construction and family overviewHVAC duty and approach-temperature inputs
Drawing and documentation
The on-page drawing is a generated, not-to-scale identification schematic. Its dimensions come from the reference catalogue; its depicted plate/port geometry is not a certified manufacturing drawing.
Danfoss B3-030 manufacturer document AI000086438429en-000101. Source revision/date is not recorded with this catalogue entry.
Request the reviewed model drawing and configuration-specific rating before manufacture or replacement.
What HEXNOVAS needs for final selection
Send the full B3-030 designation, plate count, original mechanical rating and connection information. Provide the fluid or refrigerant, inlet/outlet conditions, flow and allowable pressure drop.
Thermal selection inputs and pressure-drop reviewThird-party brand and model names are used solely to identify existing equipment and dimensional references. HEXNOVAS is an independent supplier and is not affiliated with or endorsed by those manufacturers. Dimensional similarity does not establish thermal, mechanical or connection equivalence.