วัสดุแบบเติมกระดาษ
- 304 เหล็กไร้คราบ
- 316L เหล็กไร้คราบ
- ไททาเนียม
- 254SMO
- ฮาเลลูยา
- นิกเกิล
HEXNOVAS replacement plates & gaskets
Alfa Laval M10B replacement plate.
HEXNOVAS manufactures replacement plates and gaskets for Alfa Laval M10B heat exchangers. The OEM brand and model identify the equipment the parts are intended to fit. Plate pattern, gasket groove, material and operating duty are verified before supply.
Technical reference
Dimensions and identification data.
- Plate width
- 371 mm
- Plate length
- 871 mm
- Horizontal port distance
- 223 mm
- Vertical port distance
- 719 mm
- Port diameter
- 97 mm
- Channel depth
- 3 mm
- Single plate area
- 0.25 m²
- Plate pattern / note
- Alfa Laval
Model-specific engineering review
Alfa Laval M10B: identification and selection notes
M10B is an Alfa Laval installed-plate reference in the replacement catalogue. Its plate outline is 371 × 871 mm, with 223 × 719 mm port centres and a published port diameter of 97 mm.
Dimensions, construction and connections
The catalogue lists a 3 mm channel depth and 0.25 m² single-plate area. These identify the plate reference; the area is not an assembled exchanger duty or an available plate-count range.
Port-centre measurements do not specify connection diameter, thread or flange standard. Confirm the complete installed configuration.
Typical selection context
Use the plate measurements together with the original gasket groove and port-opening arrangement. Neither the M10B designation nor a matching outline establishes the complete frame configuration.
Replacement plate and gasket family overviewIndustrial fluid and cleaning requirements
Drawing and documentation
The on-page drawing is a generated, not-to-scale identification schematic. Its dimensions come from the reference catalogue; its depicted plate/port geometry is not a certified manufacturing drawing.
HEXNOVAS legacy replacement-plate dimensional catalogue. Source revision/date is not recorded with this catalogue entry.
Request the reviewed model drawing and configuration-specific rating before manufacture or replacement.
What HEXNOVAS needs for final selection
Send an M10B nameplate or original plate identification, photographs of both plate faces and the gasket groove, existing plate count, plate material/thickness and both fluid duties. Identify which plate positions require replacement.
Plate and gasket material selectionCompatibility check
Send the original nameplate and plate photographs.
The dimensions above are an identification reference. HEXNOVAS verifies corrugation, port arrangement, gasket groove, material, thickness and operating conditions before supply.
Third-party brand and model names are used solely to identify existing equipment and dimensional references. HEXNOVAS is an independent supplier and is not affiliated with or endorsed by those manufacturers. Compatibility requires verification of the original plate, gasket groove and operating duty.