Spares & lifecycle support

Replacement plates, gaskets & services.

Compatible components and engineering support for installed gasketed plate heat exchangers—from one gasket set to a complete replacement plate pack.

Identify my equipment

HEXNOVAS replacement heat exchanger plates and fitted gaskets in multiple compatible sizes

Supply scope

Correctly identified components—not a visual guess.

The original model, plate pattern, port arrangement, material, gasket groove and duty are reviewed before compatibility is confirmed.

Replacement heat-transfer plates
Replacement gaskets and complete gasket sets
Complete assembled plate packs
Plate material and thickness review
Gasket material selection for the fluid and temperature
Thermal re-rating and duty verification
Model, port and dimension identification
Replacement of discontinued equipment

Factory footage

Plates and gaskets in production.

A direct view of the workshop behind HEXNOVAS replacement plate, gasket and plate-pack supply.

Installed equipment support

Compatible plate and gasket ranges.

HEXNOVAS supports replacement evaluation for commonly installed international GPHE platforms. Availability is confirmed by model and technical identification.

Alfa Laval

View models and specifications

APV / SPX

View models and specifications

SONDEX / Danfoss

View models and specifications

Tranter

View models and specifications

GEA / Kelvion

View models and specifications

Vicarb / Viex

View models and specifications

Funke

View models and specifications

HISAKA

View models and specifications

API Schmidt

View models and specifications

Thermowave

View models and specifications

Brand names and model references are used only to identify compatibility with installed equipment. HEXNOVAS is an independent supplier and is not affiliated with these manufacturers.

Quick model finder

Find the right plates and gaskets.

Search by port distance, brand or model number. Use any one field, or combine them to narrow the results.

Measure centre to centre. Horizontal is the smaller left-to-right distance; vertical is the larger top-to-bottom distance.

Models & specifications

Replacement plate model reference.

Use the model list as an initial reference only. Final compatibility must be confirmed from the nameplate, plate geometry, gasket groove, dimensions, material and actual duty.

01

Alfa Laval

65 model references

Model	Angle	Channel depth (mm)	Port OD (mm)	Port distance (mm)		Plate size (mm)		Single plate area (m²)	Type / note
Model	Angle	Channel depth (mm)	Port OD (mm)	Horizontal	Vertical	Width	Length	Single plate area (m²)	Type / note
M3	60°120°	2.5	Ø29	60	357	125	429	0.03	Alfa Laval
T5M	52°	3.1	Ø48	100	553	192	642	0.08	Alfa Laval
M6B	58°118°	2	Ø59	140	640	248	747	0.15	Alfa Laval
M6M	60°126°	3.0	Ø58	140	640	248	747	0.15	Alfa Laval
TS6M	67°120°	4	Ø68	203	380	329	509	0.08	Alfa Laval
TL6B	68°125°	2.0	Ø65	140	1036	248	1148	0.25	Alfa Laval
M10B	60°118°	3	Ø97	223	719	371	871	0.25	Alfa Laval
M10M	57°121°	4.0	Ø98	223	719	371	871	0.25	Alfa Laval
TL10B	87°130°	2	Ø109.5	218	1338	373	1499	0.50	Alfa Laval
TL10P	125°65.5°	3.0	Ø105	218	1338	375	1500	0.50	Alfa Laval
M15B	70°130°	3	Ø140	298	1294	496	1498	0.65	Alfa Laval
M15M	61°123°	4.0	Ø140	298	1294	496	1498	0.65	Alfa Laval
TS20M	57.5°122.5°	4	Ø195	363	698.5	621	961	0.30	Alfa Laval
M20M	48.5°131.5°	4.0	Ø205	353	1479	620	1745	0.85	Alfa Laval
T20M	48.5°131.5°	4	Ø205	353	1479	620	1745	0.85	Alfa Laval
T20P	71°117°	3.0	Ø210	353	1478	621	1749	0.90	Alfa Laval
T20B	70°127°	2	Ø209	353	1478	621	1749	0.90	Alfa Laval
MX25M	56°121°	4.0	Ø230	439	1939	746	2246	1.50	Alfa Laval
MX25B	55°127.5°	3	Ø230	439	1939	746	2246	1.50	Alfa Laval
M30	67°127°	3.4	Ø328	596	1842	995	2245	1.80	Alfa Laval
TL35B	124° 64°	3	Ø350	578	2177	998	2598	2.20	Alfa Laval
TL15B	125° 68°	2.0	Ø155	288	2035	498	2250	1.00	Alfa Laval
P16	60°120°	3	Ø29	60	357	123	427	0.03	Alfa Laval
P26	46°120°	3.0	Ø70	135	592	248	709	0.13	Alfa Laval
P36	90°	5	Ø120	226	946	400	1124	0.32	Alfa Laval
A15B	72 120°	2.5	Ø160	350	1315	587	1552	0.71	Alfa Laval
AK20	52°128°	4	Ø210	365	931.5	664	1215	0.50	Alfa Laval
A35	72	4.9	Ø350	766	1854	1210	2290	2.10	Alfa Laval
M6MW	55°130°	3	Ø58	140	640	247	748	0.14	Semi-welded
M10BW	112°	2.6	Ø100	223	719	374	874	0.22	Semi-welded
MK15BW	69° 128°	3	Ø140	298	1044	498	1248	0.47	Semi-welded
M20MW	126° 49°	4.1	Ø204	353	1478	620	1745	0.83	Semi-welded
MA30W	58°	4	Ø330	561	1811	995	2244	1.55	Semi-welded
T20S	127	7.5	Ø170	353	1478	616	1740	0.85	Wide gap Free flow
TL35S	127	8	Ø348	578	2178	991	2591	2.20	Wide gap Free flow
Widegap200S	127	7.5	Ø170	353	1478	616	1740	0.85	Wide gap Free flow
Widegap350S	127	8	Ø348	578	2178	991	2591	2.20	Wide gap Free flow
T45M	118° 60°	4.0	Ø450	720	2468	1246	2996	2.80	450/500

Additional compatible models

T35PTS35PTL35SAQUAAQUA80AQUA100I60I60MI100BI100MI150BI150MM15FP22EC350EC500AC400AC600T45MT50MTS50MWidegap200SWidegap350SAlfaVap350AlfaVap500AlfaCond400AlfaCond600

02

APV / SPX

36 model references

Model	Angle	Channel depth (mm)	Port OD (mm)	Port distance (mm)		Plate size (mm)		Single plate area (m²)	Type / note
Model	Angle	Channel depth (mm)	Port OD (mm)	Horizontal	Vertical	Width	Length	Single plate area (m²)	Type / note
H17	横竖 120°	3	Ø74	150	800	271	920	0.17	APV
N35	横竖 120°	2.8	Ø85	238	1069	371	1202	0.36	APV
SR2	46°90°	3	Ø63.5	180	700	298	838	0.20	APV
J060	60°120°	3.0	Ø229	465	915	746	1192	0.60	APV
J092	60°120°	3	Ø229	465	1290	746	1567	0.92	APV
J107	60°120°	3.0	Ø229	465	1477.5	746	1755	1.07	APV
J185	60°120°	3	Ø229	465	2415	746	2692	1.85	APV
Q030E	60°120°	3.0	Ø114	310	743	496	920	0.32	APV
Q030D	121° 61°	4	Ø112	310	743	492	920	0.31	APV
Q055E	120°60°	3.0	Ø114	310	1238	496	1415	0.55	APV
Q055D	121° 61°	4	Ø112	310	1238	492	1415	0.57	APV
Q080D	121° 61°	4.2	Ø112	310	1757	492	1934	0.80	APV
Q080E	120°	3	Ø114	310	1757	496	1934	0.80	APV
A055	50°120°	3.2	Ø150	380	1057	595	1271	0.55	APV
A085	50°120°	3	Ø150	380	1531	595	1745	0.85	APV
M092	竖121°	2.8	Ø229	465	1290	747	1565	0.92	APV
M060	竖121°	3	Ø229	465	915	747	1190	0.60	APV

Additional compatible models

B063B110B134B158B205C063C110C134C158C205J060ESJ092ESJ107ESJ185ESO030O050L080 deep/ lowL080ESL080DF

03

SONDEX / Danfoss

37 model references

Model	Angle	Channel depth (mm)	Port OD (mm)	Port distance (mm)		Plate size (mm)		Single plate area (m²)	Type / note
Model	Angle	Channel depth (mm)	Port OD (mm)	Horizontal	Vertical	Width	Length	Single plate area (m²)	Type / note
S4A	130°	2.35	Ø28	70	381	140	449	0.04	Sondex
S8A	130°	2.35	Ø28	70	656	140	724	0.08	Sondex
S7A	55°125°	2.60	Ø60	126	394	230	498	0.07	Sondex
S14A	55°125°	2.60	Ø60	126	694	230	798	0.14	Sondex
S20A	55°125°	2.60	Ø60	126	894	230	998	0.20	Sondex
S9A	56°125°	2.30	Ø66	192	381	306	496	0.09	Sondex
S19A	56°125°	2.30	Ø66	192	701	306	816	0.19	Sondex
S31A	56°125°	2.30	Ø66	192	1050	306	1166	0.31	Sondex
S37	60°134°	3.50	Ø81	238	1071	380	1212	0.37	Sondex
S21	135°55°	2.60	Ø100	225	719	380	871	0.21	Sondex
S21A	135°55°	2.60	Ø100	225	719	380	871	0.21	Sondex
S22	140°55°	4.00	Ø100	225	719	378	882	0.22	Sondex
S41A	135°55°	2.60	Ø147	296	890	500	1100	0.41	Sondex
S41	135°55°	2.60	Ø147	296	890	497	1100	0.41	Sondex
S62	55°135°	2.60	Ø147	296	1292	500	1502	0.62	Sondex
S86	55°	2.60	Ø147	296	1694	500	1904	0.86	Sondex
S110	55° 135°	2.60	Ø147	296	2094	500	2304	1.10	Sondex
S42	135°55°	3.80	Ø147	296	890	497	1100	0.42	Sondex
S63	131°55°	3.80	Ø148	296	1292	500	1502	0.63	Sondex
S47	135°55°	2.60	Ø100	225	1365	380	1518	0.47	Sondex
S64	135°55°	2.60	Ø100	225	1771	380	1924	0.64	Sondex
S43	61°121°	2.60	Ø202	395	791	656	1058	0.43	Sondex
S65	61°121°	2.60	Ø202	395	1091	656	1358	0.65	Sondex
S100	61°121°	2.60	Ø202	395	1489	656	1756	1.00	Sondex
S130	61°121°	2.60	Ø202	395	1891	657	2153	1.30	Sondex
S113	62° 125°	2.80	Ø250	448	1527	758	1846	1.13	Sondex
S113G	62° 125°	2.80	Ø250	448	1527	758	1846	1.13	Sondex
S81	50°126°	3.50	Ø303	480	1080	868	1464	0.81	Sondex
S121	50°126°	3.50	Ø303	480	1490	868	1874	1.21	Sondex
S188	50°126°	3.50	Ø303	480	2120	868	2504	1.88	Sondex

Additional compatible models

SFD13S145S201S210S251SF123SF160

04

Tranter

29 model references

Model	Angle	Channel depth (mm)	Port OD (mm)	Port distance (mm)		Plate size (mm)		Single plate area (m²)	Type / note
Model	Angle	Channel depth (mm)	Port OD (mm)	Horizontal	Vertical	Width	Length	Single plate area (m²)	Type / note
GX7	51.2° 129°	2.20	Ø30	60	640	125	715	0.08	Tranter
GX12	85°115°	3.00	Ø67	135	592	250	714	0.13	Tranter
GL13	58°120°	3.00	Ø67	135	592	248	714	0.13	Tranter
GC16	60°118°	1.90	Ø55	135	592	250	700	0.16	Tranter
GX18	85°115°	3.00	Ø67	135	822	248	941	0.18	Tranter
GC26	66°114°	4.00	Ø105	226.5	779	384	941	0.26	Tranter
GX26	85°115°	3.30	Ø105	226.5	779	384	941	0.26	Tranter
GX42	85°115°	3.30	Ø105	226	1189	385	1352	0.42	Tranter
GX51	85°115°	3.25	Ø145	300	1143	507	1354	0.51	Tranter
GC51	60°118°	4.00	Ø145	300	1143	505	1352	0.51	Tranter
GC60	63°115°	4.40	Ø216	420	910	700	1196	0.60	Tranter
GX60	85°115°	3.50	Ø194	420	910	704	1196	0.60	Tranter
GX100	85°115°	3.50	Ø194	420	1490	704	1776	1.00	Tranter
GX140	85°115°	3.50	Ø194	420	2070	704	2356	1.40	Tranter
GX64	85°115°	3.00	Ø152	285	1320	506	1552	0.64	Tranter
GX91	85°115°	3.00	Ø152	285	1800	506	2032	0.91	Tranter
GX118	85°115°	2.90	Ø152	285	2280	506	2512	1.18	Tranter
GX85	85°115°	3.30	Ø315	570	1140	942	1528	0.85	Tranter
GX145	85°115°	3.30	Ø315	570	1720	942	2108	1.45	Tranter
GL85	85°115°	3.30	Ø315	570	1140	942	1528	0.85	Tranter
GL145	85°115°	3.30	Ø315	570	1720	942	2108	1.45	Tranter
GX205	85°115°	3.30	Ø315	570	2300	942	2688	2.05	Tranter
GX265	85°115°	3.30	Ø315	570	2880	942	3268	2.65	Tranter
GL230	大、小、竖	4.50	Ø458	700	2090	1250	2650	2.60	OD 450/500

Additional compatible models

GL8GL230GL240GL330GL430

05

GEA / Kelvion

17 model references

Model	Angle	Channel depth (mm)	Port OD (mm)	Port distance (mm)		Plate size (mm)		Single plate area (m²)	Type / note
Model	Angle	Channel depth (mm)	Port OD (mm)	Horizontal	Vertical	Width	Length	Single plate area (m²)	Type / note
NT50T	129°127°	2.80	Ø58	130	371	246	492	0.07	GEA
NT50M	129° 127°	2.80	Ø56	130	743	246	864	0.18	GEA
NT50X	129° 127°	2.80	Ø56	130	1115	246	1236	0.26	GEA
NT100T	横竖128°	3.00	Ø110	262	707	445	897	0.25	GEA
NT100M	横竖128°	3.00	Ø110	262	1113	445	1303	0.44	GEA
NT100X	横竖128°	3.00	Ø110	262	1519	445	1709	0.63	GEA
NT150L	横竖120°	3.20	Ø155	314	1572	541	1804	0.85	GEA
NT150S	横竖120°	3.20	Ø155	314	1092	541	1324	0.48	GEA
NT250S	横竖124°	3.10	Ø250	420	1406	745	1736	0.88	GEA
NT250M	横竖124°	3.10	Ø250	420	1703	745	2033	1.13	GEA
NT250L	横竖124°	3.10	Ø250	420	2000	745	2330	1.38	GEA
N40	180°	5.00	Ø120	257	1227	432	1406	0.45	Wide gap Free flow
VT04	128°	2.55	Ø32	61	480	129	550	0.04	GEA
VT10	53°127°	3.00	Ø50	118	691	212	780	0.10	GEA
VT20	横竖127°	3.90	Ø79	212	868	337	999	0.26	GEA
VT40	横竖118°	3.90	Ø115	257	1227	425	1400	0.46	GEA
VT80(M)	横竖117°	3.20	Ø175	382	1526	614	1766	0.84	GEA

06

Vicarb / Viex

8 model references

Model	Angle	Channel depth (mm)	Port OD (mm)	Port distance (mm)		Plate size (mm)		Single plate area (m²)	Type / note
Model	Angle	Channel depth (mm)	Port OD (mm)	Horizontal	Vertical	Width	Length	Single plate area (m²)	Type / note
V4	60°	3.00	Ø30	62	430	125	500	0.04	Vicarb
V8	52°120°	3.00	Ø49	100	554	188	640	0.08	Vicarb
V13	51°120°	3.50	Ø70	130	625	241	739	0.13	Vicarb
V20	51°120°	3.50	Ø70	130	875	241	989	0.20	Vicarb
V28	52°120°	4.00	Ø100	234	882	393	1052	0.28	Vicarb
V45	52°120°	4.00	Ø100	234	1302	393	1472	0.45	Vicarb
V60	52°120°	3.90	Ø155	310	1280	540	1510	0.60	Vicarb
V100	52°120°	3.90	Ø155	310	2000	540	2230	1.00	Vicarb

07

Funke

10 model references

Model	Angle	Channel depth (mm)	Port OD (mm)	Port distance (mm)		Plate size (mm)		Single plate area (m²)	Type / note
Model	Angle	Channel depth (mm)	Port OD (mm)	Horizontal	Vertical	Width	Length	Single plate area (m²)	Type / note
FP10	126.5°54°	2.34	Ø57	126	494	230	598	0.10	Funke
FP16	126.5°54°	2.34	Ø57	126	694	230	798	0.16	Funke
FP22	126.5°54°	2.34	Ø57	126	894	230	998	0.22	Funke
FP31	126°53	2.60	Ø100	225	894	381	1055	0.31	Funke
FP40	126°53	2.60	Ø100	225	1141	381	1302	0.40	Funke
FP50	126°53	2.60	Ø100	225	1388	381	1548	0.50	Funke
FP71	126° 53	2.60	Ø100	225	1882	381	2042	0.72	Funke
FP41	54°126°	3.00	Ø150	290	941.5	505	1156	0.41	Funke
FP60	54°126°	3.00	Ø150	290	1306	505	1521	0.60	Funke
FP80	54°126°	3.00	Ø150	290	1671	505	1886	0.80	Funke

08

HISAKA

18 model references

Model	Angle	Channel depth (mm)	Port OD (mm)	Port distance (mm)		Plate size (mm)		Single plate area (m²)	Type / note
Model	Angle	Channel depth (mm)	Port OD (mm)	Horizontal	Vertical	Width	Length	Single plate area (m²)	Type / note
UX10	65°126°	2.3	Ø70	186	760	301	881	0.21	HISAKA
UX20	60°121°	2.8	Ø100	260	1100	420	1260	0.42	HISAKA
UX40	61°120°	3.6	Ø190	360	1520	615	1771	0.89	HISAKA
UX80	61°123°	4.55	Ø325	630	1860	1038	2268	1.8	HISAKA
RX10A	60°120°	2.7	Ø100	230	804	362	935	0.27	HISAKA
RX30A	60°120°	3.2	Ø163	309	1302	512	1505	0.64	HISAKA
RX50A	121°	3.45	Ø216	360	1520	674	1820	0.98	HISAKA
RX70	60°120°	4	Ø255	435	1600	760	1923	1.16	HISAKA
LX10A	40°120°	4.1	Ø100	222	706	360	849	0.25	HISAKA
LX30A	60°120°	4.5	Ø156	300	1023	510	1228	0.45	HISAKA
LX50A	59°119°	4.64	Ø213	400	1346	676	1616	0.87	HISAKA

Additional compatible models

UX01UX05UX90UX00AUX10AUX20AUX40A

09

API Schmidt

20 model references

Model	Angle	Channel depth (mm)	Port OD (mm)	Port distance (mm)		Plate size (mm)		Single plate area (m²)	Type / note
Model	Angle	Channel depth (mm)	Port OD (mm)	Horizontal	Vertical	Width	Length	Single plate area (m²)	Type / note
Sigma09	123°	2.75	Ø30	90	704	159	794	0.09	API Schmidt
Sigma13	54°128°	2.9	Ø70	135	590	250	710	0.13	API Schmidt
Sigma26	59°126°	3.8	Ø72	174	981	304	1116	0.25	API Schmidt
Sigma27	120°60°	3.7	Ø72	174	980	305	1117	0.27	API Schmidt
Sigma36	58°130°	3.8	Ø88	218	1076	364	1230	0.37	API Schmidt
Sigma37	137° / vertical 117°	3.7	Ø88	218	1076	365	1231	0.37	API Schmidt
Sigma48	68°136.5°	4.7	Ø195	340	1078	592	1364	0.53	API Schmidt
Sigma49X(39X)	129°46.4°	2.3	Ø110	272	944	440	1129	0.39	API Schmidt
Sigma35 (shallow)	53°125°	2.2	Ø110	272	944	440	1128	0.38	API Schmidt
Sigma25	61°124°	3.8	Ø110	272	710	440	894	0.27	API Schmidt
Sigma35	61°124°	3.8	Ø110	272	944	440	1128	0.38	API Schmidt
Sigma55	61°124°	3.8	Ø110	272	1334	440	1518	0.58	API Schmidt
Sigma56	58°125°	3.2	Ø215	325	1048	600	1333	0.51	API Schmidt
Sigma76	58°125°	3.2	Ø215	325	1423	600	1708	0.75	API Schmidt
Sigma96	58°125°	3.2	Ø215	325	1798	600	2083	1	API Schmidt
Sigma66	53°124°	3.8	Ø138	290	1470	498	1679	0.7	API Schmidt
Sigma106	56°124°	3.7	Ø227	425	1675	722	1972	1.1	API Schmidt
Sigma136	56°124°	3.7	Ø227	425	2081	722	2378	1.45	API Schmidt
Sigma156	57°124°	4	Ø340	560	1835	975	2250	1.6	API Schmidt

Additional compatible models

Sigma19

10

Thermowave

6 model references

Model	Angle	Channel depth (mm)	Port OD (mm)	Port distance (mm)		Plate size (mm)		Single plate area (m²)	Type / note
Model	Angle	Channel depth (mm)	Port OD (mm)	Horizontal	Vertical	Width	Length	Single plate area (m²)	Type / note
TL150S	54.7°	3.80	Ø43	125	825	244	981	0.10	Theromwave
TL90S	54.7°	3.80	Ø43	125	565	244	721	0.16	Theromwave
TL500S	127.5°60°	3.80	Ø107	256	1256	438	1496	0.50	Theromwave
TL250S	127.5°60°	3.80	Ø107	256	774	438	1014	0.28	Theromwave
TL650S	125.6°58.6°	4.00	Ø206	305	1153	586	1495	0.57	Theromwave
TL850S	125.6°58.6°	4.00	Ø206	305	1693	586	2035	0.91	Theromwave

Identification checklist

Send enough information to avoid the wrong plate or gasket.

01Equipment nameplate and manufacturer
02Complete model number
03Clear photographs of the plate and gasket
04Plate length, width, port diameter and port spacing
05Plate material, thickness and quantity
06Operating media, temperatures and pressure

Replacement enquiry

Send the nameplate, plate photos or existing datasheet.

Request replacement support